H13 steel Roller shutter aluminum profile extrusion dies

Because the aluminum alloy of aluminum alloy roller shutters has low density but relatively high strength, which is close to or exceeds that of high-quality steel, aluminum alloy doors have good plasticity and can be processed into various profiles. They have excellent electrical conductivity, thermal conductivity and corrosion resistance, so they are widely used. Used in the door industry, its usage is second only to steel. Aluminum alloy rolling shutters are used in various places such as shops, high-end residential areas, commercial streets, corporate gates, anti-theft windows, bank entrances, etc. Aluminum alloy is the most widely used non-ferrous metal structural material. Anti-theft aluminum alloy rolling shutters can be repaired. Good anti-corrosion performance, after use, can significantly reduce the wear and noise during operation of rolling shutter doors and windows, and increase the service life of components.

The Main Advantages of Hollow Mold

1.It can extrude hollow profiles or pipes with double-hole or multi-hole inner chambers, and can also produce multiple hollow products at the same time, so the production efficiency is high, which is difficult or even impossible to achieve with bridge tongue molds;

2.It can extrude semi-hollow profiles with large cantilever beams that are difficult to produce with plane dies;

3.Removable, easy to process, low cost;

4.Easy to separate residual materials, simple operation, short auxiliary time, the extrusion cycle can be completed with ordinary tools on ordinary bar extruders, and at the same time, the residual materials are short and the yield is high;

5.Continuous extrusion can be realized, and products of any length can be cut according to needs;

6.The number, size and shape of the split holes can be changed, so that the cross-sectional shape is relatively complex, the wall thickness difference is large, and it is difficult to use the working belt, the obstruction angle, etc. to adjust the flow rate of the hollow profile well;

7.A taper split hole can be used to extrude a hollow product with a larger shape on a small extruder, and it can ensure sufficient deformation.

The Difference Between Solid Die and Hollow Die

Solid Die

The solid die is relatively simple, as long as the split hole is designed, the aluminum handle is squeezed out of the flat flag hole to form a cross section after mixing.

Like aluminum flat strips, aluminum rods, some special-shaped materials, etc.

Hollow Die

Hollow dies are generally combined by two combined molds, so that the cavity can be formed by splitting the flow through the working belt during extrusion, such as aluminum shells and round tubes.

For ordinary extrusion dies, to produce hollow profiles, a splitter die must be used, which consists of an upper die and a lower die. The upper die is generally used to guide flow and position the hollow part of the hollow profile. The lower mold is the outer surface working belt and empty knife.

Most of the non-hollow profiles use solid dies. Generally speaking, there is only one mold including diversion and working belts. Of course, there are special cases. Here we only explain the general production conditions.

JIELIWEI has been providing Aluminium Profile mould for clients at home and abroad. With extraordinary craftsmanship and competitive price in this trade, more and more clients established long-term cooperative relationships with us.
If you are looking for Architectural Aluminum Profile Mold, Decorative Aluminum Profile Mold, Industrial Aluminum Profile Molds, Curtain Wall Aluminium Profile Extrusion Dies,Lighting Material Aluminium Profile Extrusion Dies, Roller Shutter Aluminium Profile Extrusion Dies..., Jieliwei is the perfect extrusion mold supplier for you!